Medical Grade Silicone Closed Wound Drainage System
Closed Wound Drainage
| Product name | Disposable Silicone/PVC Closed Wound Drainage System Kit |
| Capacity | 100ml, 200ml, 400ml,600ml,800ml |
| Sterilization | EO Gas |
| Certificate | CE/ISO13485/FDA |
| Needle size | Fr7,Fr8,Fr10,Fr12,Fr14,Fr15,Fr16,Fr18 |
| Material | Made of imported medical grade silicone |
| Applicational | Used for negative pressure drainage and liquid storage |
| Usage | Be used for patients who be requested to accept closing type drainage after different kinds of operations |
200ml 3-springs wound drainage resrvior with 100cm PVC drainage tube and trocar, bed sheet clamp and robort clamp, Suitable for FR7.10.12.14.15.16.18.19, 20pcs/ctn
400ml 3-springs wound drainage resrvior with 100cm PVC drainage tube and trocar, bed sheet clamp and robort clamp, Suitable for FR7.10.12.14.15.16.18.19, 12pcs/ctn
600ml 3-springs wound drainage resrvior with100cm PVC drainage tube and trocar, bed sheet clamp and robort clamp, Suitable for FR7.10.12.14.15.16.18.19, 12pcs/ctn
Closed Wound Drainage
Needle Size: Fr7, Fr10, Fr12, Fr14, Fr16, Fr18, Fr19
1.Parts: Container, two to the connector, drainage pipe, connecting pipe, needle, non-return valve, and so on.
2. Main raw materials: PVC and/or silicone rubber According to drainage pipes and containers of different materials used can be divided into PP,PS,SS three types According to the capacity of different containers can be divided into.
3. Size: 200ml,400ml,500ml and 800ml.
This product is used for abdominal, chest, breast and other parts of the fluid, pus and blood drainage.
Minimum 110cm drainage tube with trocar
- Made of imported medical grade silicone.
- Utilize internal channels or fluted,to swiftly remove exudate.
- Independent channels facilitate drainage and reduce risk of occlusion.
- Made by one time, no connector ensures patients' comfort upon removal.
- Radio-opaque line through the length for X-ray visualization.
- Available with or without "Three Face" stainless steel trocar.
To Activate
1.Following placement of wound tubing inside body,completely insert reservoirtube into suction port A.
2.Insert plug into pouring spout B just far enough to engage the flanges.Be carefulnot to impede air flow through pouring spout.
3.Close clamp on reservoir tube.
4.Fully compress the reservoir.
5.Completely insert the plug into the pouring spout.6.Release clamp to activate.
3-Spring Evacuator
Wound Drainage Reservoir 100% have positive pressure/ leak test, screens out any leakage or poor welding on the reservoir.
| Capacity | Size (FR) |
| 200ml | 7 |
| 200ml | 10 |
| 200ml | 12 |
| 200ml | 14 |
| 200ml | 16 |
| 200ml | 18 |
| 400ml | 7 |
| 400ml | 10 |
| 400ml | 12 |
| 400ml | 14 |
| 400ml | 16 |
| 400ml | 18 |
| 600ml | 7 |
| 600ml | 10 |
| 600ml | 12 |
| 600ml | 14 |
| 600ml | 16 |
| 600ml | 18 |
To Empty:
1.Determine the volume of exudate using calibrations on side of reservoir.
2.Engage clamp on unperforated reservoir tube.
3.Remove plug from pouring spout B and empty.
To Reactivate:
1.Be sure reservoir is completely empty.
2.Repeat steps 2 through 6.
