High Quality Disposable One Piece Colostomy Bag with Twist Tie
These ostomy bags are designed for patients with ostomy problems. It is made of high quality hydrocolloid glue material, good adhesion, and not easy to hurt your skin. One-piece system, easy to replace and operate, and it can keep the waste in and avoid any embarrassing odors to bring you comfortable feeling.
Specification
Product Name | One-Piece Open Colostomy Bag | Non-woven Color | Transparent, light brown, skin color |
Body Bag | High resistant film | Group | Adult |
Non-woven Weight | 30g/ m² | PET thickness | 0.1mm |
OEM | Accept | Closure | OEM |
Barrier thickness | 1mm~1.2mm | Full Hydrocolloid | Full Hydrocolloid |
High resistance film thickness |
0.08mm | Advantage | No allergy, Excellent hydrocolloid adhension, High resistant film |
Volume | >600ml | Storage | store in a cool day place away from heat and sunlight |
Filter method | Activated Carbon Filter | Application | Used for the patient who has just finishedthe surgical neostomy of ileum or colostomy |
Ostomy Pouch | Skin Barrier | Facial Tissue | Different thickness of release paper, release film (with shear line) |
Viscose | Hydrocolloid dressing, strong and soft, skin-friendly. At the same time, according to the characteristics of market users, the formulation of hydrocolloids is optimized and customized. | ||
Substrate | Color EVA, transparent PE film, white PE perforated film | ||
Bag Body | Lining | Non-woven fabrics and perforated membranes, when using non-woven fabrics as linings, adopt a window design, which not only blocks the excrement but also facilitates the observation of the stoma state. An inner lining has been added for a softer and more comfortable fit against the skin. Avoid the discomfort caused by the skin and the surface of the bag body after the skin sweats. | |
Bag | Adopt multilayer high barrier co-extrusion membrane, transparent, brown, yellow, etc. | ||
Assembly Combination | Filter Carbon | There are round, square, crescent-shaped and other models. On the basis of high-barrier membrane odor isolation, the smell can be adsorbed and filtered again, and the gas generated in the bag can be effectively discharged at the same time to prevent bulging. | |
Sealing Accessories | There are clips, aluminum strips, Velcro for colostomy bag or ileostomy bag. Has drain valve for urostomy bags. | ||
Plastic Fastener | It is used for the connection between the chassis and the bag body in the two-piece ostomy bag. There are two modes of operation: embedded and mechanical fit. |
Features
1.High quality hydrocolloid glue material, good adhesion, and not easy to hurt your skin.
2.Non-woven lining, soft, sweat-absorbent, low friction sound.
3.Self-sealing design, without extra expense to purchase clips.
4.Keep the waste in and avoid any embarrassing odors.
5.One-piece system, easy to replace and operate.
6.The chassis diameter range is 15-65mm (0.6-2.6 inch), suitable for patients with new stoma.
7.If there is impregnation, be sure to replace it in time.
Surgical Colostomy Bag
What is stoma?
An ostomy is the result of surgery to eliminate disease and relieve symptoms. It is an artificial openingthat allows feces or urine to be excreted from the intestine or urethra. The stoma opens at the end of the intestinal canal, and the intestine is pulled out of the abdominalsurface to form a stoma.
Closed pocket
Open pocket
Instructions
Wipe the stoma and its surrounding skin with warm water and dry, remove the sclerotic keratinised skin and stain, keep the skin around the stoma clean and dry.
Measure the size of the stoma with the measuring card supplied. Do not touch the stoma with your fingers while measuring it.
According to the measured size and shape of the stoma, cut a hole of an appropriate size on the film of the ostomy flange.The hole diameter is usually 2mm bigger than the stoma diameter.
Peel the protective release paper on the inside ring of the flange and stick aiming at the stoma(It is good to blow air into the bag before sticking, in order to prevent thin films from sticking to each other), and then strip the protective release paper on the outside ring, and carefully paste up from the middle towards the outside.
In order to make stickup secure(especially in areas and seasons with low temperature), you should press the pasted part with your hands for several minutes, in turn, the hydrocolloid flange could increase viscosity with the rising temperature.e clamp can be used many times).